'Important business news, read THIS!
Control rods
£15.60
 Control rod; gearchange or brake rod. Threaded M6 left hand at one end and M6 right hand at the other for 15mm each end;  perfect for fine tuning length without needing to remove end fittings. Chose size required. NOTE size quoted is overall length; you will need to choose length based on additional length of end fitments to be added!
  • ROD END BEARINGS. Rod end bearings (also known as rose joints or Heim joints) are 30mm long from the end to the centre of the hole. So, if you allow 10mm of rod engagement, then each rod end bearing is equal to adding 20mm to the length of the rod.
  • CLEVIS.  25mm long from the plain hole centre to the start of the threaded hole.
 Control rod; gearchange or brake rod. Threaded M6 left hand at one end and M6 right hand at the other for 15mm each end;  perfect for fine tuning length without needing to remove end fittings. Chose size required. NOTE size quoted is overall length; you will need to choose length based on additional length of end fitments to be added!
  • ROD END BEARINGS. Rod end bearings (also known as rose joints or Heim joints) are 30mm long from the end to the centre of the hole. So, if you allow 10mm of rod engagement, then each rod end bearing is equal to adding 20mm to the length of the rod.
  • CLEVIS.  25mm long from the plain hole centre to the start of the threaded hole.
Customer Reviews (0)